ROCKBROS Bike Repair Stand Bench Mount Home Bike Stand for Maintenance Bike Clamp Workbench Work Stands Bicycle Repair Rack for Road Mountain MTB Bikes
$36.99
Price: $36.99
(as of Nov 04, 2024 10:04:41 UTC – Details)
Product Description
1 EASY TO INSTALL
2 QUICK RELEASE
3 DETAILS ABOUT IT
Bike Repair Stand
Bike Repair Stand
ROCKBROS
BAND
ROCKBROS
IRON+RUBBER
MATERIAL
Aluminum
BLACK+BLUE
COLOR
BLACK
44LB/20KG
LOADING CAPACITY
66LBS
1.2-3INCH/3-7.5CM
CLAMP RANGE
0.8-2INCH/2-5CM
ROCKBROS
BAND
ROCKBROS
IRON+RUBBER
MATERIAL
Aluminum
BLACK+BLUE
COLOR
BLACK
44LB/20KG
LOADING CAPACITY
66LBS
1.2-3INCH/3-7.5CM
CLAMP RANGE
0.8-2INCH/2-5
Bike Repair Stand 
Bike Repair Stand 
Easy to Mounted: The bike clamp bench mount is secured by four long screws and can be mounted stably and easily. Quick release design allows you to easily assemble work bike stand.
Adjustable Clamp: The bench mount bike repair stand with plastic clamps are sturdy and perform well, Clamp allows for clamping of bike tubes from 30mm to 75mm. Soft non-slip silicone clamp is efficient and non-damaging bicycle paint finish.
Easy to Use: Rotate the upper arm to hold the bike by the vertical seatpost or by the horizontal frame and tighten the various clamp. Sturdy, simple design makes servicing a bicycle a breeze.
Wear-resistant Materials: The bike stand for maintenance is made of iron, wear-resistantfor long time. suit for commuter bike, mountain bike, road bike.(Tips: Load Capacity:44 Pounds)
Space Saving: You can choose to install the bicycle repair stand to the work bench or wall. Plus you can flip it around when you’re not using it so it doesn’t stick out. more convenient to keep at home. also works great as a bow vice, great value.
Customers say
Customers like the ease of installation, value for money, and design of the product. They mention it works well for mountain bikes, servicing motorcycle suspensions, and as a bow vise. Some also like the storage capacity. However, some dislike the slip resistance and have mixed opinions on the build quality and clamp quality.
AI-generated from the text of customer reviews
13 reviews for ROCKBROS Bike Repair Stand Bench Mount Home Bike Stand for Maintenance Bike Clamp Workbench Work Stands Bicycle Repair Rack for Road Mountain MTB Bikes
Add a review
Related Products
$36.99
J.H. –
Solid, reasonably priced
Got this to use as a bow vise after seeing it recommended on YouTube. Works great for that purpose and it’s not expensive.
Michael Black –
Works well and stores in small places
Very versatile design and I love how little room it takes up in my garage when not in use! I screwed mine into a block of scrap 2×4 wood and then simply put it in the bench vise when I want to use it. Works great!
harv –
A good bench stand for the money
I wasn’t expecting a really strong bench stand given the price, but it works fine for my needs. I have heavy cruisers and carbon mountain bikes. It works well for the mountain bikes if I mount close to the balance point of the bike, which is the top tube of the frame. Clamping down on a carbon frame is generally a no-no, but if you do it carefully and don’t expect to be wrenching hard on the bike it is just fine. It is not strong enough to hold the bike on the seat post or for the heavy cruisers.I like the compactness and space efficiency of bench stands to compliment my floor stand which takes up a lot more space and isn’t that much stronger.Overall, for what it is and how much is costs, I find it to be slightly above expectations.
janet moore –
Sturdy and easy to mount
This bike work station clamp works as advertised. It was easy to mount to an existing bench and can be adjusted to hold your bike in a variety of positions.
Tony S. –
Great product for the price.
Perfect if you have limited space. I mounted the stand on 2 small 2×4 pieces that fits in my bench vise. Works great, and it’s easy to store.
Craig Sherwood –
Great quality
Makes it easier to work on bikes
Eric Young –
Cheap and useful alternative to a full stand
This stand is okay. It uses cheaply made plastic components everywhere, including in the clamp. The only metal parts are the mounting plate, one bolt in each joint, and the matching nut. The screws provided are angled head wood screws, which are the wrong type to mount sheet metal to wood. I suspect these will create mounting and reliability problems for people who use the provided screws. I replaced them with flange screws and a washer each. Additionally, there is not enough friction available at the middle pivot to keep a bike held off its center of gravity. This may be a serious problem with heavier bikes that do not have a long, flat top tube, i.e. mountain bikes. I would definitely not trust this stand for an ebike. The clamp interface itself is fine.Another thing to think about is that this mount restricts you to working on your bike next to a counter or wall. If you want to walk around your bike or spray it with a hose, this likely will not be a good option.If you simply need a cheap way to get your bike off the floor, this may work. But if you are looking for something to use for any job, until the end of time, save your money.
Coldsmokeskier –
Bench stand
It’s a nice addition. I didn’t want a huge fee standing bike repair station taking up more space in my garage. This is prefect. Great base mount to surface. The overall bike connections work well. Will see how will they hold up over time. Stoked to have it.
wjohn8 –
Easy to install and set up. Quality product and solid workmanship. Very happy with the purchase.
Steph –
Exactly what we ordered and as pictured.
Robert Salasidis –
Good for the price. Solid enough for a mountain bike. Had will not met the metal frame.
Thomas –
It seems like the screws that come with a lot of products are cheaply made and strip easily. Not the ones that came with this bike stand. The screws are well forged and survived the installation process. That being said the rest of the stand is not bad. I wanted one that could be installed onto a work bench. This one fit that bill. Once installed I tried it out on my mountain bike and my Aventon Soltera 7. The MTB was a little too heavy for it. It would keep one wheel off the floor and that was it. Still, good enough for my purposes. I am not a professional. The stand was able to support the full weight of the Soltera 7. Considering the amount of plastic I don’t know how long this stand will last. I can see where it would have been better if the clamp had been made out of metal. I would have paid extra for that. Time will tell how long it will be around for.
BikeDad-d-O –
Paid $55 CAD to my door for this bench-top mounted bike clamp. It came with mounting hardware, but I screwed-in easily with my own oversize screws onto my bench top, and voila!It can hold up my heavy enduro bikes adequately…but it does freespin/rotate around the Z-axis. the Yaw angle clamps firmly…so it’s just missing a restraint in one degree of freedom. Fine for light duty work, or to hold an item you’ve just removed from your bike which is occupying your only bike stand. Like having a friend around.Also it does a passable job at clamping…though it is made with a cheesy firm plastic and not a nice thick softer durometer rubber…and they can slip off either end. However it does not mar a dropper posts’ stanchion. It’s not as nice as the BikeHand’s clamp on their free-standing stand…and both obviously far below the capability and ease-of-use of a Park Tool clamp arm……but for a budget choice, and a budget item, it fits the bill. I have also bought some photochromic bike glasses from Rockbros, they offer reasonable stuff at fairly economic prices.