Caregiver Pager Wireless Call Button Call Bell Alert Button Nurse Alert System for Home/Elderly/Patients/Disabled 3 Waterproof Transmitters 3 Plugin Receivers (600+ft Operating Range)…

Meets all the needs.
This product was super easy to install. It works great and is loud enough to hear even when doors are closed. Exactly what we needed for my homebound mom. Highly recommend.

Very good out of the box. Changing ringtones is difficult
The system has very good range and worked well out of the box. But the default ringtone was too close to my door bell. It took awhile to figure out how to change it. The factory directions are short and imprecise. This is what I have learned.BACKGROUND INFORMATIONThe “receivers” are the devices with the AC plugs and speaker. The “transmitters” come in two flavors: 1. The round call buttons 2. The oval shaped device with the black plastic band across the bottom. The button is in the middle of the black band.The “smarts” are in the receivers. A receiver assigns a ringtone to a transmitter as part of the pairing procedure. You can pair multiple transmitters to a receiver in a single procedure.The receivers are independent devices. They do not cooperate with each other. If you have three receivers you will have to do the pairing procedure three times.RINGTONE SELECTION AND PAIRINGPlug in an extension cord and place the socket end by a comfortable chair or sofa. Get ALL your transmitters and receivers and place them within easy reach.Plug a receiver into the extension cord. Allow 10 seconds for the receiver to power up. Click the “Volume Button” repeatedly until it is at the lowest audible setting. This will save wear and tear on your ears. Press and HOLD the “Ringtone Button” for 20 seconds to reset the receiver to default settings and remove all existing pairings between the receiver and transmitters. Release the “Ringtone Button”.Click the “Ringtone Button” repeatedly and select your favorite ringtone.Press and HOLD the “Volume Button” for at least 5 seconds with one hand, then with your other hand click a transmitter’s button to pair the two units and assign the previously selected ring tone to the transmitter. You will hear the receiver play the previously selected ring tone. This is your confirmation that the two units paired successfully.Continue to hold the “Volume Button”.Pickup the next unpaired transmitter and click its button. You will again hear the previously selected ring tone. This is your confirmation that the two units paired successfully. Repeat with the next unpaired transmitter while continuing to hold the “Volume Button” on the receiver. You can release the “Volume Button” after you have paired the last transmitter.Repeat the “Ringtone Selection And Pairing” process with each receiver.

My Dad’s safety was our priority
These are a relief! My 90-year old dad has moved in with us. He wears hearing aids and is 80% blind. We placed the ‘sticky’ buzzers close to the shower and toilet – kinda low, in case he fell and we were not watching. The hand-held buzzers we placed close to his chair and his other table where he eats. He uses them for us to assist with meals, tv, safety issues, etc. We placed our receivers in the kitchen (a hub for us), the master bedroom and garage, in case we are outside. The alarm (DING – DONG) is loud enough to hear it when we are outside. It’s a really good thing to have. I would recommend the larger package if you can afford it, as it accomodates the safety factor better. I’d buy this again. It’s easy to “install” and to get working – FAST. It’s also easy for my dad to use – that’s the most important thing!

Ayuda mucho en el cuidado del adulto mayor o un enfermo en casa.