THIRDREALITY ZigBee Smart Plug 4 Pack with Real-time Energy Monitoring,15A Outlet, Zigbee Repeater,ETL Certified,ZigBee Hub Required,Work with Home Assistant,Compatible Echo Devices and SmartThings
$38.99
Price: $38.99
(as of Oct 11, 2024 19:29:04 UTC – Details)
Product Description
Third Reality Smart Plug is a simple solution to make the intelligence appliances smarter, like lights, fans, coffee makers and more. After the update, Smart Plug Gen2 keeps all former features and upgrade with real-time power monitoring and restore status.
Schedule and Timer Function
Set the schedule or timer to automatically turn on/off any home electronic appliances, to make your life more intelligent.
Group Control
Along with Smart App, you can have a lot of advanced groups features for smart home.
Remote Control
Easily control your home appliances anytime, anywhere, no limited of time and distance.
Voice Control
When connect with compatible Echo Devices or other Zigbee hubs that can work with smart speaker, you can use voice commands to turn on/off your plugs.
Compatible Devices 
Energy Monitoring & Dashboard
In SmartThings App, you can see the energy cost, history and dashboard, then create routines.
Energy Monitoring & Dashboard on ZHA and Z2M
Restore status available on ZHA & Z2M, it means user can customize on/off status after power-on.
Remote Control and Real-time Energy Monitoring
In Hubitat, you can remote control the smart plug and see the real-time energy cost.
Real-time Monitoring, Total Consumption, History
Third Reality supports remote control, total consumption,real-time power monitor and restore status.
1 Over view
2 SmartThings
3 Home Assistant
4 Hubitat
5 Third Reality
More Application Scenarios 
Zigbee Repeater 
Third Reality Smart Plug uses Zigbee Low Energy Mesh wireless technology which allows for a farther reach, enabling whole-home installations. Each one serves as a signal repeater, even if a smart plug is out of reach from the Alexa Echo device, it can still be controlled using the Mesh network.
When the Smart Plug Gen2 paired with Hubitat hub, but can’t see current state and can’t control it in Hubitat?
Please change the device type to “Generic Zigbee Outlet” in Hubitat, then it should work properly.
What platfroms support energy monitoring?
You can see the energy monitoring dashboard in SmartThings and Home Assistant(Z2M/ZHA), create routines when the consumption is too high or too low.
Does it works as a Zigbee repeater?
Yes, it works as a ZigBee repeater, which is a very practical function that extends the signal range with mesh network.
What is the function of restore status? And which platforms are available?
Restore status means users can customize on/off state after power-on again, it is available on ThirdReality App and Home Assistant Zigbee 2 MQTT.
How to move Plug Gen2 to another echo device?
Make sure you remove the plug from the Alexa app and wait 30 minutes to allow cloud synchronization before repairing with different Echo Device.
Product Dimensions : 2.7 x 1.3 x 1.13 inches; 9.59 ounces
Item model number : 3RSP02028BZ
Date First Available : December 13, 2022
Manufacturer : Third Reality, Inc
ASIN : B0BPY5D1KC
Country of Origin : China
ZIGBEE 3.0 STANDARD: Works with compatible Zigbee hubs or Echo devices with Zigbee hub built-in, such as Echo (4th Gen), Echo Plus (1st Gen and 2nd Gen), Echo Studio, Eero 6, Eero Pro 6, Home Assistant, SmartThings 2015/2018, Aeotec, Hubitat and THIRDREALITY Hub. Zigbee Hub Required.
EASY SETUP and COMPATIBLE DESIGN: Maximize efficiency and convenience with space-saving design that won’t occupy the adjacent socket. Super easy setup with Compatible Echo Devices, just plug the Smart Plug in the wall outlet and say “Alexa, discover my devices” , then it will automatically find the plug. Please get in touch with us when you meet any problems or need further support.
REAL-TIME ENERGY MONITORING: Monitor current consumption of your plug-in devices, effectively save energy and reduce waste. This function supported by Home Assistant, SmartThings, Hubitat and THIRDREALITY smart hub Gen2.
SAFETY SETTING: In order to ensure your home safety, we also realize the function of restoring status that means users can customize on/off state after powered on again. Currently THIRDREALITY Hub Gen2 and Home Assistant (ZHA and ZigBee2MQTT) support this function.
REMOTE CONTROL & VOICE CONTROL: Easily control your home appliances anytime, anywhere, no limited of time and distance. When Smart Plugs connect with compatible Amazon Alexa Echo Devices or other ZigBee hubs that can work with Alexa or Google Home, then you can free your hands, just delivering voice commands to turn on/off your plugs.
HOME AUTOMATION: Intelligent life starts with automatically turning on the coffee maker and toaster, enjoy a leisure breakfast. With more features, you can place a mount of plugs in one group, so that you can control all the plugs in the group with one click.
Customers say
Customers like the functionality, ease of setup, and value for money of the electronic switch. They mention it works great, is easy to pair with Zigbee hubs, and provides detailed data about grid voltage. Some are also happy with the plug’s functionality, responsiveness, and power consumption. However, some customers have mixed opinions on the connection speed.
AI-generated from the text of customer reviews
8 reviews for THIRDREALITY ZigBee Smart Plug 4 Pack with Real-time Energy Monitoring,15A Outlet, Zigbee Repeater,ETL Certified,ZigBee Hub Required,Work with Home Assistant,Compatible Echo Devices and SmartThings
Add a review
Related Products
$38.99
Kumar Home –
Smart, Seamless, and Reliable: The Ultimate Smart Plug Choice
A must have for any smart home enthusiast. Its effortless integration with Zigbee hubs like smartthings, comprehensive energy monitoring features, and fantastic connectivity without drops set it apart from the rest. From quick setup to personalized startup behavior options, this plug offers top-notch performance and reliability on top of great value. Whether you’re a tech novice or a smart home pro, this smart plug is a must-have for seamless automation and energy efficiency.
TheAppleFreak –
Both the power monitoring and non power monitoring versions work perfectly within Home Assistant
I have a total of six of these plugs now (4 basic, two with power monitoring) in my home. To be brief, I’m very satisfied with these so far.The four basic plugs act mostly as repeaters to help extend my mesh from my Home Assistant Pi in the front of the house to the boiler room in the back of the house (one floor down in the basement). With one plug in each room, with various amounts of obstructions between them, each maintains healthy LQIs to each other and to the sensors connected to them (above 60 in all cases, reaching 150 when they have an unobstructed LOS in one case). Honestly I could probably remove a plug or two without impacting the network’s stability, but I’d rather have the peace of mind. One slight downside that I noticed was from one plug that had nothing plugged into it; if the plug was on but there was no load, it would make a buzzing noise. Turning it off stopped the noise, so I did that. I’m not sure if this happens with a load plugged in.The two energy monitoring plugs are connected to our washing machine and gas dryer (which both use standard 120v power cables). Each plug measures the following values, as described in Home Assistant while using ZHA:- AC frequency (Hz)- Power/active power (W)- Power factor (%, may show as Unknown or not show up at all)- Current/RMS current (A)- Voltage/RMS voltage (V)- Summation delivered (kWh, which appears to be cumulative over time)The readings appear to be generally sensitive at the lower end of the scale. Both machines are registered as pulling 1-2W when off and about 4W at idle, which allowed me to set up a threshold helper in HA that lets me know when the machine is on or off. I think the update frequency is somewhere on the order of 15-30 seconds, but I’m not entirely sure. For my purposes, it’s more than fast enough.All plugs work perfectly when using ZHA. The pairing process was painless, all plugs support power on configuration, you can set up OTA firmware updates in ZHA with a config change, and it supports channel migration, so if you change your Zigbee network to use another channel they’ll automatically update without needing to re-pair.All in all I’m quite satisfied with all of these plugs, especially at their current prices of 4 basic for $30 and one power monitoring for $12.UPDATE 2024/1/10: I recently had to re-set up my Home Assistant install, and both of the power monitoring plugs I owned before no longer show the nonfunctional Power Factor stat. This might have been disabled at some point in the past on ZHA’s side, as the labels for each stat had been changed. I’ve updated the list above to reflect the new labels.Additionally, I picked up another power monitoring plug recently when they were on sale recently, and this new one has Power Factor both in the list and functioning. EDIT 2024/1/30: After some diagnostics, I’ve determined all three PM plugs are running the same firmware revision (0x10013048, or v72 if you convert the last three numbers from hex to decimal), but the older two don’t show the power factor. This suggests to me there might have been a minor hardware revision to reenable that properly, so if you’re looking to write automations or analytics that use it, be sure to check the plugs beforehand. Beyond that, all power monitoring plugs work identically.
aschmitz –
Inexpensive, Just Works.
These come packaged very densely in a small box, and work without any fuss in any existing Zigbee network. I plugged one in and added it to my Home Assistant setup (via the built-in ZHA support; requires a separate antenna, of course) trivially and without any hassle.The price of these is quite appealing, as they cost in the same range as other Zigbee smart plugs that *don’t* have energy monitoring, but these have it as a handy feature.I haven’t fully tested the energy monitoring up to 15A, as I don’t have any devices I’d want to use with it that pull that much power, but it does a fine job of monitoring the draw from my 3D printer up to around 7A. The energy reporting via Zigbee isn’t extremely continuous: it can take around 10-20 seconds per update, and they don’t seem to always happen at consistent intervals. Nonetheless, it is still handy to be able to see power usage over time.The plug itself reports a number of statistics: voltage, AC frequency, current, instantaneous demand, power (in watts), power factor, and voltage.Besides the somewhat inconsistent timing of energy updates, my only complaint about these switches is their side button: the button itself needs to be pressed with a decent amount of force, and probably benefits from a little bit of exercise when you first get the switch. I had to press mine 2-3 times to get it to register the button press early on, but now (a couple months and maybe 20 physical button uses later), it seems fine. This is a minor complaint given that the button works well now, and more of a heads-up.Overall, this pack is a feature-packed great value. There are a couple minor areas for future improvements, but they haven’t had much practical impact on my use of the plugs: if I needed more smart plugs, these are almost certainly what I’d buy.
J I –
Bought these to expand my Zigbee network and they have not disappointed me so far. They are the cheapest set Iâve bought (a smudge over $10 a unit) and act as expected for a zigbee router. Hopefully they survive the test of time!
InvalidUsername –
I originally got these plugs when I was using ZHA with HomeAssistant, and gave them a very negative review, because they would not work at all. A firmware update made it so that none of the devices, even the ones I hadn’t paired yet, would function. However, I later realized that this isn’t an issue with this device, it was an issue with ZHA, which I found to be extremely unreliable. I’d often get the “Initializing…” loop which never succeeded.Since then, I’ve switched to Zigbee2MQTT, and these plugs now work flawlessly as plugs and routers! I really like that they have integrated power monitoring, and have a very subtle LED which doesn’t light up the entire room! Overall, these are a great value!
Patrick –
Funciona como esperaba para mis automatizaciones en Home Assistant. Sin embargo, la próxima vez optarÃa por los que tienen medición de energÃa.
Enrique –
buen precio y gran funcionalidad
Amazon Customer –
Works great with Echo 4th generation